Pyroelectricity
A new type of electronic circuit was developed in 2013 that may help to improve the performance of solar panels. Typically cooler, slower, mellower electrons don't have enough energy to produce a usable electric current. Ultrasolar has developed an electronic circuit (ideally built into an inverter) that passes a very high frequency signal backwards through the DC wires into the solar module and cells. The slower electrons catch these waves and are turned into hot and fast electrons for long enough to escape the crystal matrix and generate a useful current. This could lead to inverter efficiencies of over 100 percent.
Conversion Efficiency Record for Thin Solar Cells
In 2013 a new record was set for the conversion of sunlight into energy. Typically the numbers for thin film solar run between 18.7 percent and 24 percent, but Alta Devices, a Silicon Valley solar manufacturer, set a new record of 30.8 percent conversion efficiency. The downside is that it costs more, the upside is that the new solar cell can generate more electricity from a smaller surface area. This could prove to be a useful technology for portable devices.
Robots and Solar Panels
Robots are far more efficient than people at doing repetitive tasks that require a high level of precision. Solar panel installing and cleaning robots can be an ideal application for massive solar power farms which will both reduce costs and increase efficiency. A pair of robot workers named Rover and Spot, both from Alion Energy, have begun installing and cleaning solar panels in 2013.
Providing Power When There is No Sun
A new technological innovation in solar energy can help to produce solar power even when there is no sun. In October a new innovation at Solana's 280 megawatt (MW) solar plant demonstrated how a ‘salt battery’ can keep generating electricity even when there is no sun. This is the first of its kind thermal energy storage system in the US partners with the world's largest parabolic trough mirrors to concentrate solar energy. This project was realized with the help of the Department of Energy’s loan program.
Providing Power When there is No Wind
There has been a breakthrough in wind turbine technology that addresses the issue of intermittent wind. In May 2013 GE released wind turbine innovations that predict wind availability and gauge power needs so that wind turbines can be optimally positioned. Batteries built into the turbine store power which can be used when there is no wind.
Offshore Wind Turbines Using Concrete Spheres
A new approach to energy storage for offshore wind turbines was developed by researchers at MIT in 2013. This innovation is ideal for producing electricity when there is little or no wind. This concept employs huge concrete spheres which would anchor wind turbines to the sea floor. When a wind turbine produces more energy than is needed, power would be diverted to drive a pump attached to the underwater structure, pumping seawater from a 30-meter-diameter hollow sphere. Then when there is no wind the water would flow back into the sphere through a turbine attached to a generator, producing energy.
Floating Offshore Wind Turbines
Typically offshore wind turbines cannot be located in waters more than 60 meters deep but a new floating wind turbine design from Norwegian-based oil and gas company Statoil, can be put in water up to 700 meters deep. In 2013 they began work on the world's largest hub of floating wind turbines off the coast of Scotland. This new innovation significantly increases the size of areas where wind turbines can operate. Two additional floating turbines are also planned off the coast of Fukushima, Japan, along with the world’s first floating electrical substation.
Harnessing the Power of Waves to Produce Energy
Although the technology has been around for a while, in 2013 the United States began generating electricity from its first commercial, grid-connected underwater tidal turbine off the coast of Maine. The company behind the Ocean Renewable Power Company (ORPC) has invested more than $21 million into the project. A March environmental assessment found no detrimental impact on the marine environment. Along with the US Department of Energy, two more devices are planned for 2014. In November, ORPC was chosen to manage a wave-energy conversion project in remote Yakutat, Alaska.
Harnessing the Power of Waves to Produce Fresh Water
A new desalination plant near Perth, Australia, is currently being developed will draw energy from the power of ocean waves. Carnegie Wave Energy’s plant will use the company’s underwater buoy technology to harness ocean wave force to pressurize the water, eliminating the need for fossil-fuel-powered electric pumps. This will be the first carbon-free desalination plant. It is both efficient and low costs. The plant will supply 55 billion litters of fresh drinking water per year.
Better Battery Technology
A new battery is being produced that is safer, lighter and stores more power. These factor are of major importance for the widespread proliferation of electric vehicles (EVs). The current generation of batteries have limited charge capacities and this severly restricts the distances that they can travel. This is known as range anxiety and it is a major obstacle inhibiting the widespread adoption of EVs. The new lithium ion technology out of Oak Ridge National Laboratory uses nanotechnology. They have also combined the approach with lithium-sulfur battery technology, which could further enhance cost-effectiveness.
Datacenters Using DC Instead of AC
Direct current (DC) has advantages over the dominant source of electricity which is known as alternating current (AC). DC is cheaper, more efficient and works better with renewable energy sources like wind and solar. It does not require adaptors that waste energy and heat. Facebook, JPMorgan, Sprint, Boeing, and Bank of America have all built datacenters that rely on DC power which are 20 percent more efficient, cost 30 percent less, and require 25 to 40 percent less floorspace.
Homes Using DC Instead of AC
Residences will soon new USB technology that can deliver 100 watts of power. This is ideal for low voltage personal electronics, and it will save homes energy while providing cost savings.
Energy from Plant Waste
The US is gearing up to produce energy from plant waste. Two cellulosic biofuel plants came online in 2013 and two more began construction. INOES Bio’s cellulosic ethanol plant in Florida and KiOR’s cellulosic plant in Mississippi began commercial production last year. Other cellulosic plants began construction in 2013 including one for Iowa and another in Kansas. With these four plants in operation, the 2014 cellulosic fuel mandates of 17 million gallons will be easily surpassed.
© 2014, Richard Matthews. All rights reserved.
creative, novel, dynamic, technology, technological, interesting, new, unique, different, departure, development, building, approaches, ways,
Related Articles
Businesses Innovative and Diverse Recycling Efforts
Innovation is Key for Sustainability According to Tomorrow’s Value Rating 2013
Innovation in the Low Carbon Energy Economy
Top Climate Innovators
Video: Innovation is the Solution to Climate Change
Video: Sustainability and Innovation
Innovation is the Future of Canadian Cleantech
An Integrative Approach to Eco-Innovation
An Open Model of Innovation
Innovation and the Development of
Sustainability is a Catalyst for Innovation
10 Steps to Sustainability-Driven Innovation
China's Green Innovation
France's Innovation in Renewable Energy
Xerox's Green Innovation
Interface's Award Winning Sustainable Product Innovation
HP's Sustainable Innovation
PUMA's Sustainable Packaging
Sustainable Brands Innovation Open Finalists
Ford's Flower Powered Green Innovation
Best Green Tech Innovations of 2010
