Showing posts with label BEV. Show all posts
Showing posts with label BEV. Show all posts

Assessing the Environmental Impact of Electric and Hybrid Vehicle Production

Although electric and hybrid cars create more carbon emissions during their production than standard vehicles, they are still greener overall. This is one of the findings in a report prepared by Ricardo1for, in collaboration with the membership of the Low Carbon Vehicle Partnership that includes major vehicle manufacturers and oil companies.

The increased emissions created during the production of electric and hybrid vehicles is further compounded by disposal issues. However, overall electric and hybrid vehicles still have lower carbon footprints than fossil fuel powered vehicles.


“This work dispels the myth that low carbon vehicles simply displace emissions from the exhaust to other sources. However, it does highlight the need to look at reducing carbon emissions from vehicles throughout their lifecycle,” said Greg Archer, LowCVP Managing Director.

A 2008 study by researchers at Carnegie Mellon University found that life-cycle greenhouse gas emissions, which include emissions from both manufacturing and operating a vehicle, are 32 percent less from plug-in hybrids than from gasoline-powered cars.

Approximately three quarters of the carbon created in production is attributable to the steel used in vehicles. In an electric vehicle almost half (43%) of the carbon created in production arises from the battery. To reduce carbon in vehicle production we need low weight, low carbon alternatives for steel and batteries.

Andy Carroll, Managing director for Eurotax Glass’s, said that the industry will see an evolution towards learning how to estimate the residual value impact of improved technologies and batteries as well as end of life disposal.

Although calculating whole life carbon emissions is complex, it is essential for comprehensive vehicle comparisons.

© 2011, Richard Matthews. All rights reserved.

Related Post
Assessing the Environmental Impact of Operating Electric and Hybrid Vehicles

Assessing the Environmental Impact of Operating Electric and Hybrid Vehicles

The dramatically smaller footprint of electric cars varies depending on the source of electricity used to power them. "The types of power plants installed in the next two decades will not only affect how much we can reduce emissions from electricity, but also from vehicles," said Carnegie Mellon engineer Kyle Meisterling.

Newer fossil fuel powered vehicles are much more efficient than previous generations of automobiles, but they are not as efficient as hybrids or fully electric vehicles.

In places like California where tailpipe standards are some of the toughest in the nation, a 2010 gas powered car puts out only 2 percent of the emissions of a 1980s model. However, electric vehicles have a much smaller carbon footprint than even the most efficient fossil fuel powered vehicles.

We should not underestimate the contributions of electric vehicles to our environment. According to Tom Cahill, a professor emeritus of physics at UC Davis, EVs offer "a whole lot of gain in climate change."

All-electric vehicles burn no fossil fuels, and hybrids burn relatively small amounts of gas. The tailpipe emissions from electric cars are zero and hybrids have a significantly reduced emissions profile compared to conventional vehicles. In places like Los Angeles, on some days, the tailpipe emissions of hybrids contain less pollution than the air.

A 2008 study by researchers at Carnegie Mellon University found that America's electricity mix derives 45 percent of electricity from coal, 23 percent from natural gas, 20 percent from nuclear, and 12 percent from dams, solar, wind and other sources. The emissions associated with electric and hybrid vehicles will improve significantly once we reduce the use of fossil fuel powered energy, particularly coal.

One of the most interesting findings of the Carnegie research finds that even when electricity derived from coal is used to power hybrids they emit fewer greenhouse gases than gasoline-powered cars.

In states with cleaner power mixes, plug-in hybrids have less than half the greenhouse gas footprint of conventional gasoline vehicles.

In a recent study, Mark Jacobsen, a professor of civil and environmental engineering found that electric vehicles powered by wind energy were best, with a 99 percent reduction in carbon and air pollution emissions from the current vehicle fleet. Not suprisingly, ethanol ranked last in his study, with the largest carbon footprint.

"There's no technical reason we can't ramp up to a lot more electric vehicles," Jacobsen said. "It's a question of whether society as a whole is motivated to do it."

Andy Carroll, Managing director for Eurotax Glass’s, said the key to making electric vehicles more popular will be for manufacturers to completely remove the risk of residual value in batteries from falling into the hands of the customer.

© 2011, Richard Matthews. All rights reserved.

Related Post
Assessing the Environmental Impact of Electric and Hybrid Vehicle Production

A Glimpse into the Future of Traction Batteries

There are many cutting edge battery technologies that have yet to be seen by the general public. The future of battery electric vehicles depends primarily upon the cost and availability of batteries with high energy densities, power density, and long life. Li-ion, Li-poly and zinc-air batteries have demonstrated energy densities high enough to deliver range and recharge times comparable to conventional vehicles.

In 2008, Lawrence Berkeley National Laboratory developed a carbon nanotube lead acid battery pack that, according to the company, can deliver 380 miles (610 km) range and can be recharged in less than 10 minutes. This technology extends current battery life times 4-fold.

Lead-acid batteries are the cheapest and most common traction batteries available, but these have an environmental impact through their construction, use, disposal or recycling. Lead-acid batteries have an energy density of 30–40 Wh/kg. The efficiency (70–75%) and storage capacity of the current generation of common deep cycle lead-acid batteries decreases with lower temperatures, and diverting power to run a heating coil reduces efficiency and range by up to 40%. Lead-acid batteries in EV applications also take up a significant (25–50%) portion of the final vehicle mass.

Nickel-metal hydride batteries are now considered a relatively mature technology. While less efficient (60–70%) in charging and discharging than even lead-acid, they boast an energy density of 30–80 Wh/kg, far higher than lead-acid. When used properly, nickel-metal hydride batteries can have exceptionally long lives, as has been demonstrated in their use in hybrid cars and surviving NiMH RAV4EVs that still operate well after 100,000 miles (160,000 km) and over a decade of service. Downsides include the poor efficiency, high self-discharge, very finicky charge cycles, and poor performance in cold weather.

Lithium-ion batteries have an impressive 200+ Wh/kg energy density and good power density, and 80 to 90% charge/discharge efficiency. In 2008, the DOE's Argonne National Laboratory received an award for EnerDel/Argonne High-Power Lithium-Ion Battery for Hybrid Electric Vehicles. This highly reliable and extremely safe battery is lighter in weight, more compact, more powerful and longer lasting than the nickel-metal hydride (Ni-MH) batteries.

Lawrence Berkeley National Laboratory developed a Nanostructured Polymer Electrolyte for Rechargeable Lithium Batteries. This polymer electrolyte battery enables the development of rechargeable lithium metal batteries with an energy density that is high enough "to enable electric battery-driven transportation technology".

Newer forms of lithium-ion batteries have an energy storage capacity of 400 kWh and they are used in applications like electric Autonomous Underwater Vehicles (AUVs). Most EVs are now using new variations on lithium-ion chemistry to provide fire resistance, environmental friendliness, very rapid charges and very long lifespans.

A lithium iron phosphate battery developed by A123 lasts for at least 10+ years and 7000+ charge cycles, and LG Chem has a lithium-manganese spinel battery that last up to 40 years. Bolloré a French automotive parts group developed a concept car the "Blue car" using Lithium metal polymer batteries developed by a subsidiary Batscap. It has a range of 250 km and top speed of 125 km/h.

Efforts are ongoing to improve lithium ion batteries. Lithium vanadium oxide has already doubled energy density. Silicon nanowires, silicon nanoparticles, and tin nanoparticles promise several times the energy density, while composite and superlattice cathodes also promise significant density improvements.

A new company, Ampirus, is bringing to market a lithium-ion battery that is 40% more efficient than the current generation.

These new battery technologies are not only in the lab. Manned aircraft already use very thin, wide area traction batteries. Third generation traction batteries such as lithium-sulphur are being successfully used today in Unmanned Aerial Vehicles (UAVs).

New battery technologies are being applied in conjunction with solar power. Companies like SolarLab and Monte Gisborne are producing battery powered solar boats that have been around for a while. New, very flexible copper indium gallium diselenide CIGS solar cells are now powering solar boats such as those made by Kopf Solarschiff GmbH. Solar dirigibles are a perfect candidate for the new flexible photovoltaics.

The more efficient batteries are the less expensive and more user-friendly these products will be. In April 2011, US Energy Secretary Steven Chu talked about the future of electric cars and indicated that he believes that before the end of the decade EVs will be “one-third the cost of today’s batteries but have at least three times the range.” He also said it will be possible for vehicles to travel up to 500 miles on a single charge.

President Obama has called for one million EVs on American roads by 2015. Conservative estimates in a 2010 report by J. D. Power, predict EV sales in Europe to be 742,020 units, or 3.1 percent of 23.8 million sales by 2020. China is predicted to see EV sales of 332,775 or 1.9 percent market share by 2020. However, J.D. Power's predicted 2020 global market share for EVs is far lower than the 10 percent or 6 million units forecast by Renault-Nissan CEO Carlos Ghosn.

According to an IDTechEx report by Dr Peter Harrop and Raghu Das, "Electric vehicles will penetrate the market rapidly to constitute 35% of the cars made in 2025 - probably 25% hybrids, 10% pure EV but pure EV may be winning by then. Any motor manufacturer without a compelling line up of electric vehicles is signing its death warrant."

With the market for automobile traction batteries that is sure to surpass the early prediction of $37 billion in 2020, many of these advanced battery technologies will eventually find their way into commercial vehicles that are widely available to the public.

© 2011, Richard Matthews. All rights reserved.

Related Posts
Improving Battery Technology Key to Greener Cars
Electric Vehicle Battery Technology Obstacles and Solutions
Energy Storage